Data Model Column Descriptions

From Datonis
Revision as of 08:02, 22 May 2020 by Aditya (talk | contribs) (Added all column descriptions)
Jump to: navigation, search

Workcenter Shift Productivity Data Model

WorkcenterShiftFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
is_primary -
shift_name Shift Name in MInt
cycles Number of strokes of the machine
production_quantity Cycles * Parts per cycle
actual_production_time The time required to produce X parts in given time T
available_time Maximum time available for production
downtime Total time for which the machine was idle
unplanned_downtime Time during which the machine had an Unplanned downtime reason booking
planned_downtime Time during which the machine had a Planned downtime booking
expected_production_time Standard/ Target Time required to produce X parts in given time T
idle_slot_count The count of total idle slots
major_stoppages The count of downtimes for major stoppages (threshold defined in MInt Workcenter Configuration)
minor_stoppages The count of downtimes for minor stoppages (threshold defined in MInt Workcenter Configuration)
rejection_quantity Total Rejected Part Quantity
availability Availability metric for OEE Calculation
performance Performance metric for OEE Calculation
quality Quality metric for OEE Calculation
capacity_utilization The metric to identify planned downtimes
oee Overall Equipment Effectiveness (A * P * Q)
teep Total Effective Equipment Performance (OEE * CU)
compressed_air Utilities Air Compression Details
electricity Utilities Electricity Details
steam Utilities Steam Details
gas Utilities Gas Details

WorkcenterShiftDownTimeReasonsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
reason_key Unique ID for the downtime reason
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
duration Machine Downtime duration in seconds
idle_slot_count The count of total idle slots
name Downtime Reason Name
code Downtime Reason Code
category_key Unique ID for Downtime Category
category_code Downtime Category Code
category_name Downtime Category Name
is_reason If Downtime Reason is a reason
is_planned If Downtime Reason is a Planned reason
key Unique ID for Downtime Reason

WorkcenterShiftOperatorsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
operator Operator Name
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
Shift_name Shift Name in MInt

WorkcenterShiftRejectionsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
rejection_key Unique ID for the Rejection Code
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
rejection_name Rejection Name
rejection_code Rejection Code
rejection_quantity Rejection Quantity

WorkcenterShiftProductionParametersFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
parameter_key Unique ID for the Parameter
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
parameter_name Parameter Name on MInt
parameter_count Count of Parameters
metric_name Datonis Metric Name
unit Unit of measure of the parameter

WorkcenterShiftProductivityDownTimeReasonsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
reason_key Unique ID for Downtime Reasons
license_key Unique ID for the account
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
duration Machine Downtime duration in mins
loss_slot_count The count of slots which are idle
name Downtime Reason Name
code Downtime Reason Code
category_key Unique ID for Downtime Category
category_code Downtime Category Code
category_name Downtime Category Name
is_reason If Downtime Reason is a reason

Part Shift Productivity Data Model

WorkcenterPartRoutingShiftDownTimeReasonsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
part_key Unique ID for the Part/ SKU
routing_key Unique ID for the Operation
working_day Day for which the shifts are planned
reason_key Unique ID for the Downtime Reason
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
part_name Part Name
routing_name Operation Name
duration Machine Downtime duration in seconds
idle_slot_count The count of total idle slots
name Downtime Reason Name
code Downtime Reason Code
category_key Unique ID for Downtime Reason Code
category_code Downtime Category Code
category_name Downtime Category Name
is_reason If Downtime Reason is a reason
is_planned If Downtime Reason is a Planned reason

WorkcenterPartRoutingShiftFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
part_key Unique ID for the Part/ SKU
routing_key Unique ID for the Operation
working_day Day for which the shifts are planned
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
part_name Part Name
routing_name Operation Name
parts_per_cycle The quantity of parts produced in one cycle of the machine
cycles Number of strokes of the machine
production_quantity Cycles * Parts per cycle
acutal_production_time The time required to produce X parts in given time T
available_time Maximum time available for production
downtime Total time for which the machine was idle
unplanned_downtime Time during which the machine had an Unplanned downtime reason booking
planned_downtime Time during which the machine had a Planned downtime booking
expected_production_time Standard/ Target Time required to produce X parts in given time T
standard_cycle_time The standard time required to produce one Part (only machine working time)
standard_loading_time The standard time required to load one Part
standard_unloading_time The standard time required to unload one Part
standard_autocycle_time This is the addition of Standard Cycle Time, Standard Loading Time and Standard Unloading Time.
actual_cycle_time The actual time required to produce one Part (only machine working time)
actual_loading_time The standard time required to load one Part
actual_unloading_time The standard time required to unload one Part
actual_autocycle_time This is the addition of Actual Cycle Time, Actual Loading Time and Actual Unloading Time.
compressed_air Utilities Air Compression Details
electricity Utilities Electricity Details
steam Utilities Steam Details
gas Utilities Gas Details
is_last_routing If an operation is the last in that particular routing, this flag will be True.
rejection_count Count of Quality Rejections

WorkcenterPartRoutingShiftRejectionsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
part_key Unique ID for the Part
routing_key Unique ID for the Operation
working_day Day for which the shifts are planned
rejection_key Unique ID for the Rejection Code
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
part_name Part Name
routing_name Operation Name
quantity Rejection Quantity
name Rejection Name
code Rejection Code

WorkcenterPartShiftProductionParametersFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
part_key Unique ID for the Part
parameter_key Unique ID for the Parameter
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
shift_name Shift Name in MInt
part_name Part Name
parameter_name Parameter Name on MInt
parameter_count Count of Parameters
metric_name Datonis Metric Name
unit Unit of measure of the parameter

Hourly Data Model

WorkcenteHourlyFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
pph_from Hour Start Time
pph_to Hour End Time
idle_slot_count The count of total idle slots
working_day Day for which the shifts are planned
job_count Number of strokes of the machine
actual_qty Cycles * Parts per cycle
actual_production_time The time required to produce X parts in given time T
downtime Total time for which the machine was idle
planned_downtime Time during which the machine had a Planned downtime booking
unplanned_downtime Time during which the machine had an Unplanned downtime reason booking
shift_name Shift Name in MInt
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
rejection_count Rejection Quantity
scrap_count Scrap Quantity (Custom metric if Scrap is monitored for that Customer)
operators Operator Name (List of operator working in that hour)
part_names Part Name (List of Parts produced in that hour)
part_keys Unique IDs for the Parts
electricity Utilities Electricity Details
gas Utilities Gas Details
steam Utilities Steam Details
compressed_air Utilities Air Compression Details
_created_at Internal metric, not to be used by User
_updated_at Internal metric, not to be used by User

WorkcenteHourlyRoutingEnergyFact

Column Name Description
pph_from Hour Start Time
machine_key Unique ID for the Workcenter
routing_key Unique ID for the Operation
part_key Unique ID for the Part/ SKU
pph_to Hour End Time
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
part_name Part Name
part_code Part Code
shift_name Shift Name in MInt
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
utility_name Utility Name
metric_name Metric Name in Datonis
consumption_value Consumption Value
_created_at Internal metric, not to be used by User
_updated_at Internal metric, not to be used by User

WorkcenteHourlyProcessRoutingFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
pph_from Hour Start Time
parameter_key Unique ID for the Parameter
routing_key Unique ID for the Operation
parent_part_key Unique ID for the Part/ SKU
pph_to Hour End Time
shift_name Shift Name in MInt
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
dept_name Department Name in MInt
plant_name Plant Name in MInt
parameter_name Parameter Name
metric_name Metric Name in Datonis
status 1 being Good (points inside warning limits), 2 being Warning (points outside warning limits and below control limits) and 3 being Problem (points outside control limits)
points_between_lcl_lwl Count of Points Between Lower Control Limit and Lower Warning Limit
lwl Lower Warning Limit for the selected parameter/s
max Max value for the selected parameter/s
points_below_lcl Count of Points Below Lower Control Limits
cpk Process Capability Index (CpK)
uwl Upper Warning Limit for the selected parameter/s
lcl Lower Control Limit for the selected parameter/s
ucl Upper Control Limit for the selected parameter/s
cp Process Capability (Cp)
count Count for the selected parameter/s
avg Average value for the selected parameter/s
points_between_uwl_ucl Count of Points Between Upper Warning Limit and Upper Control Limit
min Minumum value for the selected parameter/s
sum Addition for the selected parameter/s
median Median value for the selected parameter/s
expected_value Expected/ Target value for the selected parameter/s
stddev Standard Deviation for the selected parameter/s
points_above_ucl Count of Points above the Upper Control Limit
points_out_of_warning_limit Count of Points out of Warning Limits
operators Operator Name (List of operator working in that hour)
part_names Part Name (List of Parts produced in that hour)
part_keys Unique IDs for the Parts
_created_at Internal metric, not to be used by User
_updated_at Internal metric, not to be used by User

WorkcenteHourlyProcessParamsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
working_day Day for which the shifts are planned
pph_from Hour Start Time
parameter_key Unique ID for the Parameter
pph_to Hour End Time
shift_name Shift Name in MInt
machine_name Workcenter Name in MInt
cell_line_name Cell/ Line Name in MInt
plant_name Plant Name in MInt
dept_name Department Name in MInt
parameter_name Parameter Name on MInt
metric_name Metric Name in Datonis
status 1 being Good (points inside warning limits), 2 being Warning (points outside warning limits and below control limits) and 3 being Problem (points outside control limits)
points_between_lcl_lwl Count of Points Between Lower Control Limit and Lower Warning Limit
max Max value for the selected parameter/s
points_below_lcl Count of Points Below Lower Control Limits
cpk Process Capability Index (CpK)
cp Process Capability (Cp)
count Count for the selected parameter/s
avg Average value for the selected parameter/s
points_between_uwl_ucl Count of Points Between Upper Warning Limit and Upper Control Limit
min Minumum value for the selected parameter/s
sum Addition for the selected parameter/s
median Median value for the selected parameter/s
stddev Standard Deviation for the selected parameter/s
points_above_ucl Count of Points above the Upper Control Limit
points_out_of_warning_limit Count of Points out of Warning Limits
part_keys Unique IDs for the Parts
part_names Part Name (List of Parts produced in that hour)
operators Operator Name (List of operator working in that hour)
_created_at Internal metric, not to be used by User
_updated_at Internal metric, not to be used by User

WorkcenteHourlyCbmParamsFact

Column Name Description
machine_key Unique ID for the Workcenter
shift_key Unique ID for the Shift
pph_from Hour Start Time
working_day Day for which the shifts are planned
parameter_key Unique ID for the Parameter
pph_to Hour End Time
parameter_name Parameter Name on MInt
metric_name Metric Name in Datonis
status 1 being Good (points inside warning limits), 2 being Warning (points outside warning limits and below control limits) and 3 being Problem (points outside control limits)
points_between_lcl_lwl Count of Points Between Lower Control Limit and Lower Warning Limit
lwl Lower Warning Limit for the selected parameter/s
max Max value for the selected parameter/s
points_below_lcl Count of Points Below Lower Control Limits
cpk Process Capability Index (CpK)
uwl Upper Warning Limit for the selected parameter/s
ucl Upper Control Limit for the selected parameter/s
lcl Lower Control Limit for the selected parameter/s
cp Process Capability (Cp)
count Count for the selected parameter/s
avg Average value for the selected parameter/s
points_between_uwl_ucl Count of Points Between Upper Warning Limit and Upper Control Limit
min Minumum value for the selected parameter/s
expected_value Expected/ Target value for the selected parameter/s
sum Addition for the selected parameter/s
median Median value for the selected parameter/s
stddev Standard Deviation for the selected parameter/s
points_above_ucl Count of Points above the Upper Control Limit
points_out_of_warning_limit Count of Points out of Warning Limits
shift_name Shift Name in MInt
machine_name Workcenter Name in MInt
dept_name Department Name in MInt
cell_line_name Cell/ Line Name in MInt
plant_name Plant Name in MInt
_created_at Internal metric, not to be used by User
_updated_at Internal metric, not to be used by User